30A 24V | 48V DC EPIP602 intelligence Solar Charge Controller LCD Display
EPIP602 solar charge controller is the second generation with high quality and reliability.
Adds new features and protections using highly advance technology
Provides longer battery life and improved system performance
Sets new standards for reliability and self-diagostics
Model No: EPIP602
EPIP602: 12/24 or 24/48 VOLT auto work, 30, 40, 50 or 60 AMPS
Microprocessor which is made in USA
PWM or ON/OFF series battery charging options
State of charge (SOC) battery regulation
Battery Ah setting, boost charging, equalising charging, float charging
Automatic load reconnection, manual load switch
Temperature compensation
LCD display: SOC as a fuel gauge, all system parameters in digital value, system status as symbols
Full circuit protection, electronic fuse Field adjustable parameters by four buttons
Load control option: ON/OFF, Dusk-to-Dawn, On + setting hours, setting time ON/OFF. (For type II)
Regulation point: 14.4 Volt
Low voltage disconnect: 11.10 Volt
Low voltage Reconnect: 12.5 Volt
Self-consumption: 10mA maximum
Terminals: For wire sizes to 10mm2
Temperature: -35 C to +55 C
Weight: 1000g
Dimension: 189*158.3mm
Compliance: CE.
30A EPIP602 Solar Charge Controller Data Sheet
Type
EPIP602 30A
Rated charging current
30A (max35A)
Rated load current (Ie )
30A
Over load, short circuit protection
1.25 times of Ie for 60secs, 1.5 times of Ie by for 5secs
overload protection; ≥2 time of Ie short circuit protection
Self consumption
Control mode : <15 mA, LED & LCD display <15mA, Total: <30mA
System voltage
12/24V or 24/48V AUTOWORK,
Work temperature
industrial (I series ): -20 degrees Celsius to +70 degrees Celsius
Battery capacity
Battery in parallel from 400AH to9000ah
Boost charging
29.6V:59.2V
equalizing charging voltage
28.8V:57.6V
Float charging
26.8V:53.6V
Temperature compensation
-5mv/ degrees Celsius /2v;
Over discharge voltage
22.8V:45.6V
Control mode
PWM charging mode & ON/OFF mode for options, control point voltage
is the intelligent compensation modify of the battery.
30A 24V | 48V DC EPIP602 intelligence Solar Charge Controller
Posted by admin in News
30A 24V | 48V DC EPIP602 intelligence Solar Charge Controller LCD Display
EPIP602 solar charge controller is the second generation with high quality and reliability.
Adds new features and protections using highly advance technology
Provides longer battery life and improved system performance
Sets new standards for reliability and self-diagostics
Model No: EPIP602
EPIP602: 12/24 or 24/48 VOLT auto work, 30, 40, 50 or 60 AMPS
Microprocessor which is made in USA
PWM or ON/OFF series battery charging options
State of charge (SOC) battery regulation
Battery Ah setting, boost charging, equalising charging, float charging
Automatic load reconnection, manual load switch
Temperature compensation
LCD display: SOC as a fuel gauge, all system parameters in digital value, system status as symbols
Full circuit protection, electronic fuse Field adjustable parameters by four buttons
Load control option: ON/OFF, Dusk-to-Dawn, On + setting hours, setting time ON/OFF. (For type II)
Regulation point: 14.4 Volt
Low voltage disconnect: 11.10 Volt
Low voltage Reconnect: 12.5 Volt
Self-consumption: 10mA maximum
Terminals: For wire sizes to 10mm2
Temperature: -35 C to +55 C
Weight: 1000g
Dimension: 189*158.3mm
Compliance: CE.
30A EPIP602 Solar Charge Controller Data Sheet
overload protection; ≥2 time of Ie short circuit protection
is the intelligent compensation modify of the battery.